SONY FIRMWARE UPDATE MAC MOVIE
SONY FIRMWARE UPDATE MAC UPGRADE
SONY FIRMWARE UPDATE MAC SOFTWARE
SONY FIRMWARE UPDATE MAC PASSWORD

SONY FIRMWARE UPDATE MAC UPGRADE

When the upgrade is completed, click Finish and disconnect the USB cable.

Note: Never turn off the camera nor disconnect the USB cable while upgrading.

The progress bar appears while upgrading (approximately 5 minutes).

After resetting, reconnection of the camera is verified.

CameraвЂ™s LCD screen Camera control wheel Note: The screen turns off when the center of the control wheel is pressed.

Press the center of the control wheel to reset the camera.

Turn off the camera, remove the battery pack or the AC adaptor, and then turn on the camera again. According to the message, stop the USB connection and click Finish. Upgrade is required Note: If Current version is Ver.1.02, the upgrade is not required.

After confirming Current version, click Next.

The current version and the version after the upgrade appear on the lower left part of the Firmware Updater.

After confirming the screens on Firmware Updater and LCD screen, click Next.

Note: From this step onwards, never turn off the camera until the firmware upgrade is completed. This screen appears on the LCD screen of the camera. If you can not see anything on the LCD monitor, please press FINDER/LCD button This screen appears on Firmware Updater. Do not cover Eyepiece sensors during the update otherwise, the LCD monitor may switch to the Viewfinder. If the mode other than Mass Storage is selected, please select Mass Storage. According to the instruction on Firmware Updater, select Menu в†’ Setup в†’ USB Connection on the camera, and confirm Mass Storage is selected.

SONY FIRMWARE UPDATE MAC PASSWORD

Type the password for the administrative account.

To load a kernel extension, the message prompts you to allow the application to make changes.

Do not connect the camera yet at this point.

Double-click the downloaded file Update_SLTA99V102.dmg.

Please save the downloaded file onto the Desktop of your computer (recommended). Click on Update_SLTA99V102.dmg to begin download. If you can not see anything on the LCD monitor, please press FINDER/LCD button.

Do not cover Eyepiece sensors during the update otherwise, the LCD monitor may switch to the Viewfinder.

Remove the memory card from the camera beforehand.

Do not remove the battery or AC adaptor during the upgrade otherwise, the camera may become inoperable due to the sudden power shutdown.

When performing the firmware upgrade, please use a fully charged rechargeable battery pack NP-FM500H or the AC adaptor AC-PW10AM (sold separately).

We recommend that you use a fully charged battery or the AC adaptor AC-PW10AM (sold separately). Note: The upgrade can be performed only when the remaining battery level is (three marks) or more.

Power source for the camera Fully charged rechargeable battery pack NP-FM500H or AC adaptor AC-PW10AM (sold separately).USB cable supplied with the camera Note: Update functionality is not guaranteed with any other USB cable.

SONY FIRMWARE UPDATE MAC SOFTWARE

RAM: 512MB or more Note: Please close all other application software before upgrading the firmware.CPU: Intel processor * Core Solo and Core Duo processors are no longer supported.If your camera firmware version is already Version 1.02, this update is not necessary. Select Menu в†’ Setup в†’ Version on the camera.The applicable products are with the firmware Version 1.01 or earlier.

Expanded the number of automatic compensation compliant lenses: SAL100M28, SAL50M28, SAL85F28, SAL18200, SAL20F28, SAL28F28.

Improvements from firmware version 1.00 to version 1.01

SONY FIRMWARE UPDATE MAC MOVIE

Note: The camera needs to be in Movie mode with set to.

Addition of HDMI simultaneous output mode In addition to the existing HDMI simultaneous output during movie recording, the camera will be able to display smooth smooth 60fps(NTSC)/50fps(PAL) video on an external monitor connected via HDMI and on the LCD screen of the camera simultaneously also during movie recording standby.

Provides support for the Dual AF function compliant lens: SAL50F14Z.

Sony is offering a firmware upgrade program for Interchangeable Lens Digital Camera SLT-A99. Thank you for your continued interest in Sony products.

Sony firmware update mac